Review a packed stack when a sticker sheet order must be picked one sheet at a time. Open a representative pack as the receiving or packing team will open it. Check that adjacent sheets separate without changing the printed face, backing or wanted sticker pieces. Ask for a revised pack proposal when normal picking leaves an unresolved contact problem.

Locate the problem before changing the specification
Record what happens when a complete sheet is picked. Two sheets may come away together and separate without damage. Another pair may separate with a mark on the backing or a visibly altered printed face. A sticker piece may stay attached to the sheet above it. These observations give the supplier different evidence to investigate.
ACTEGA's guidance for printed sheet piles discusses sticking between sheets and unwanted transfer to a contact surface. The explanation concerns its printing and coating context. Use the distinction to describe what happened, then have the supplier review the actual sticker construction and handling history before assigning a cause. ACTEGA guidance on printed sheets sticking together.
If the trouble begins when a user peels one sticker from an otherwise cleanly separated sheet, use the kiss-cut separation guide to record that different action. A curled sheet that catches in a sleeve needs a whole-sheet fit and flatness review.
Use a representative packed sample
Give the supplier the construction, layout revision, bag or bundle count, face orientation and any separators used in the order proposal. Agree where and when to review the sample using the relevant handling or storage conditions. The check is most useful when the sample has the same contact arrangement the buyer will open. If it represents only a short stack or a different wrapper, record that limit.
| Step | Record | Hold when |
|---|---|---|
| Before opening | Identify the bundle, packing revision and known storage or transport history. | The packing arrangement or condition the trial represents is unclear. |
| Pick complete sheets | Have the intended operator pick from agreed positions. Record whether one sheet comes away and where any resistance occurs. | Ordinary picking repeatedly lifts another sheet or shifts wanted pieces. |
| Inspect the touching pair | Keep both sheets in order. Photograph matched areas on both sides and retain an unopened comparison pack when practical. | Marks, transfer or damage remain unresolved under the agreed acceptance rule. |

Compare another pack only if it answers the same handling need
A supplier might propose smaller bundles, a changed orientation or a suitable separator. Ask how the change affects the work of unpacking, individual sheet counts and retail presentation. Review the revised arrangement using the same pick task. If the evidence is limited to a trial pack, record what still needs agreement for production acceptance and receiving.
Send the affected packing or intended pick sequence, quantity of sheets per bundle, artwork and construction references, and any paired photographs. Ask which sample can represent the proposed stack and which packing changes can be reviewed. ZC custom sticker sheets and project sample policy.
Request a sticker sheet quote with the bundle and pick details